Every year, I like to get ornaments with the year on it for my family. This year with my Cricut, I made my own Cricut Personalized Ornaments with sparkle holographic vinyl. It came out great and was a super easy gift to make.
Cricut Personalized Ornaments
Tools & Supplies
- Cricut Maker (get the mint one here)
- Standard Grip Mat (get it here)
- Portable Trimmer
- Cricut Sparkle Holographic Vinyl
- Weeding Tools
How to Make Cricut Personalized Ornaments?
Start with this project file of the family of deer that I used for my family pajama shirts here.
Measure front of your ornament and size the file down or up based on the specifications.
Look to see what size vinyl piece you will need and cut the vinyl down.
Next, lay the vinyl on a green standard mat and feed the mat into the sheet.
Load the fine point blade
Then, load the standard sheet with the vinyl on it into the Cricut machine using the arrow.
Hit make on the computer or app.
Choose the proper vinyl setting from the list. Here we used Sparkle Holographic Vinyl. Don’t mirror the image for vinyl.
Next, press the C on the Cricut Machine to start the make.
Once the machine is done cutting, hit the arrows to release the mat.
Weed the vinyl that you don’t need for the design.
Cut the transfer tape to match the size of the design.
Remove the transfer tape and set it on top of the vinyl design.
Use the scraper on both sides to make the design transfer to transfer tape.
Pull off the white paper slowly to make sure the design transfers to the transfer tape.
Cut a few little slits into the transfer paper along the edges to help it lay flat on the ornament.
Place the vinyl design on the ornament.
Use the scraper to smooth down the vinyl.
Peel back the transfer tape.
Use the scraper to smooth down the design.
More Cricut Vinyl Project
If you love this Cricut Personalized Starbuck Cups, check out these fun Cricut Projects.
- Cricut Coffee Mugs
- Sparkle Holographic Cricut Personalized Starbuck Cups
- Cricut Infusible Ink Coasters with Infusible Ink Pens